|
DESCRIPTION
ALCO Poly-S is a
stitchbond polyester mat designed to have exceptional tensile, tear and
elongation properties. Because of its natural softness, it conforms easily
to irregular surfaces such as the substrate of gravel roofs. Most
polyester mats have to be light enough (1.5 - 2.0 Oz/Sq Yd) to conform to
the unevenness of gravel roofs, but Poly-S will conform extremely well
while still providing the superior strength of 3 Oz/Sq Yd.
USE
: For one-, two-, or three-ply cold process
roofing systems
ADVANTAGES
» Excellent reinforcing
properties » Compatible with both solvent and emulsion
coatings » Clean and easy to handle » No fiber
breakage or dusting in handling » Conforms easily to
irregular surfaces » High resistance to thermal shock
» Lightweight » Highly penetrable, eliminating air
pockets » Exceptional tensile, tear and elongation
properties
PREPARATION
Be sure roof to be coated is swept clean. All repairs should be done
before application of Poly-S.
APPLICATION
Spray, brush or squeegee adhesive coating on
roof and before coating begins to cure, roll out Poly-S and imbed into
coating. Then top coat with roof coating. Remember to lap
accordingly: 3" side lap and 6" end lap. It may be
necessary to brush polyester mat to ensure complete adhesion.
NOTE: This material is part of the ALCO CAP Roof System (New Roof, Roof
Maintenance and Metal-Ply Roof). Call your sales representative for
further information.
SPECIFICATION
3 Oz/Square Yard
PACKAGING
40" x 340 LF Roll
25/Pallet
FOR FURTHER SAFETY
INFORMATION SEE MSDS REGARDING THIS PRODUCT
WARRANTY
We warrant our materials to be of good quality and will
replace materials found defective, providing, however, that the buyer
shall examine the materials when received and promptly notify us of any
defects before the materials are used or incorporated into a structure for
which they are intended. Unless otherwise agreed to in writing, this
warranty shall extend only to comply with specifications of materials
manufactured by and published by ALCO-NVC Inc., and made available to the
buyer at request. We cannot warrant nor in any way guarantee particular
methods, use or applications, nor can we warrant that the materials will
be suitable for any intended use. This warranty is in lieu of all others
expressed or implied and may not be extended by representatives, written
sales or information or drawings. Nor do our distributors or salesmen or
any other representatives of distributors or of this company have
any authority to extend any guarantee beyond that outlined above or to
waive the limitations of the seller's liability.
Give us a call at (800)
323-0029, we'll tell you even more!
ALCO-NVC Inc.
580
St. Jean Detroit, MI 48214-0001
Toll Free: (800)
323-0029 Fax: (313)
331-4726
HOME | ABOUT US |
PRODUCTS | SYSTEMS |
MSDS | CONTACT | REQUEST
© ALCO NVC, INC. ALL RIGHTS RESERVED. WEB SITE BY: DIVERSIFIED
COMPUTER SERVICES, INC.
|