VIEW THE MSDS

275

ALCO SHIELD
Ice and Water Protector 

DESCRIPTION
ALCO SHIELD Ice and Water Protector is a fiberglass reinforced, polymer modified asphalt membrane used as a shingle underlayment for sloped roofs. It resists the penetration of water due to wind driven rain or ice dam back up. 

USE
ALCO SHIELD placed under shingles resists the penetration of water due to wind driven rain or ice dam back ups. Can also be used under slate, tile or metal during application of a new roof or during re-roofing, after the removal of old roofing material. 
  
ADVANTAGES
»  Apply membrane directly to roof deck  »  Coarse sand covering provides slip resistant surface  »  Self healing (when roofing nails go through it)  

PREPARATION

Sweep roof deck to remove dirt and debris. The roof deck must be clean, smooth and dry prior to application. On re-roofing jobs make sure surface to be applied is secure. Check weather to insure that there is no rain in the forecast and the temperature is above 40° F. 

APPLICATION
ALCO SHIELD is applied directly to the surface of the roof. Temperatures above 40° F. allow the self adhesive quality of this product to work. This material is a vapor barrier and must be provided with proper ventilation to reduce excessive ice damming or interior condensation. 
COLD WEATHER APPLICATION: Mechanically fasten to position membrane until it has bonded to the roof. 
                                             FOR EXTERIOR USE ONLY

COVERAGE
2.25   SF Roll Covers Approximately 225 SF 
2.0     SF Roll Covers Approximately 200 SF 
1.0     SF Roll Covers Approximately 100 SF 

SPECIFICATION
ASTM D-1970  

PACKAGING
2.25   SF Roll             25/Pallet
2.0     SF Roll             25/Pallet 
1.0     SF Roll             36/Pallet

LIMITATIONS
* Do not apply over shingles or underlayment of any sort  *  Do not use on damp surfaces  *  Do not permanently expose ALCO SHIELD to sunlight. Ultraviolet light will degrade this material if exposed for more than 30 days  *  Do not store at temperatures above 110° F. 

PROPERTIES
Approximate Roll Weight:  
     2.25 Square         72 Lbs 
     2.0 Square          66 Lbs 
     1.0 Square          34 Lbs 
Membrane Width:
     Membrane:  36" 
     Release:  37.5" 
Membrane Length: 
     2.25 Square Roll:  75 Feet 
     2.0 Square Roll:  66.6 Feet 
     1.0 Square Roll:  33.3 Feet 
Membrane Thickness:  Approximately 55 mils
Application Method:  Self Adhering
Surface Composition:  Black Granules 
Membrane Reinforcement:  Fiberglass Mat
Backing Material:  Silicone Coated Release Film 

FOR FURTHER SAFETY INFORMATION SEE MSDS REGARDING THIS PRODUCT
                  

WARRANTY
We warrant our materials to be of good quality and will replace materials found defective, providing, however, that the buyer shall examine the materials when received and promptly notify us of any defects before the materials are used or incorporated into a structure for which they are intended. Unless otherwise agreed to in writing, this warranty shall extend only to comply with specifications of materials manufactured by and published by ALCO-NVC Inc., and made available to the buyer at request. We cannot warrant nor in any way guarantee particular methods, use or applications, nor can we warrant that the materials will be suitable for any intended use. This warranty is in lieu of all others expressed or implied and may not be extended by representatives, written sales or information or drawings. Nor do our distributors or salesmen or any other representatives of distributors or of this  company have any authority to extend any guarantee beyond that outlined above or to waive the limitations of the seller's liability.


Give us a call at (800) 323-0029, we'll tell you even more!

ALCO NVC
ALCO-NVC Inc.   580 St. Jean   Detroit, MI 48214-0001
Toll Free: (800) 323-0029   Fax: (313) 331-4726


HOME | ABOUT US | PRODUCTS | SYSTEMS | MSDS | CONTACT | REQUEST


© ALCO NVC, INC. ALL RIGHTS RESERVED. WEB SITE BY:
DIVERSIFIED COMPUTER SERVICES, INC.