|
DESCRIPTION
ALCO SHIELD - SMOOTH Ice
and Water Protector is a fiberglass reinforced, polymer modified asphalt
membrane used as a shingle underlayment for sloped roofs. It resists the
penetration of water due to wind driven rain or ice dam back up.
USE
ALCO SHIELD - SMOOTH placed under shingles resists the
penetration of water due to wind driven rain or ice dam back ups. Can also
be used under METAL, slate, or tile during application of a new roof or
during re-roofing, after the removal of old roofing material.
ADVANTAGES
» Apply membrane directly to
roof deck » Smooth slip resistant surface » Self
healing (when roofing nails go through it)
PREPARATION
Sweep roof deck to remove dirt and debris. The roof
deck must be clean, smooth and dry prior to application. On re-roofing
jobs make sure surface to be applied is secure. Check weather to insure
that there is no rain in the forecast and the temperature is above 40°
F.
APPLICATION
ALCO SHIELD - SMOOTH is applied directly to the
surface of the roof. Temperatures above 40° F. allow the self adhesive
quality of this product to work. This material is a vapor barrier and must
be provided with proper ventilation to reduce excessive ice damming or
interior condensation.
COLD WEATHER APPLICATION: Mechanically fasten to position membrane until
it has bonded to the roof.
FOR EXTERIOR USE ONLY
COVERAGE
2.0 SF Roll Covers
Approximately 200 SF
1.0 SF Roll Covers Approximately 100 SF
SPECIFICATION
ASTM D-1970
PACKAGING
2.0 SF
Roll
25/Pallet
1.0 SF
Roll
36/Pallet
LIMITATIONS
* Do not apply over shingles or
underlayment of any sort * Do not use on damp
surfaces * Do not permanently expose ALCO SHIELD - SMOOTH to sunlight.
Ultraviolet light will degrade this material if exposed for more than 60
days * Do not store at temperatures above 110° F.
PROPERTIES
Approximate Roll Weight:
2.0
Square 60 Lbs
1.0
Square 32 Lbs
Membrane Width:
Membrane: 36"
Release: 37.5"
Membrane Length:
2.0 Square Roll: 66.6 Feet
1.0 Square Roll: 33.3 Feet
Membrane Thickness: Approximately 50 mils
Application Method: Self Adhering
Surface Composition: Smooth Film Surface
Membrane Reinforcement: Fiberglass Mat
Backing Material: Split Silicone Coated Release Film
Service Temperature: Not to Exceed 220° F.
FOR FURTHER SAFETY
INFORMATION SEE MSDS REGARDING THIS PRODUCT
WARRANTY
We warrant our materials to be of good quality and will
replace materials found defective, providing, however, that the buyer
shall examine the materials when received and promptly notify us of any
defects before the materials are used or incorporated into a structure for
which they are intended. Unless otherwise agreed to in writing, this
warranty shall extend only to comply with specifications of materials
manufactured by and published by ALCO-NVC Inc., and made available to the
buyer at request. We cannot warrant nor in any way guarantee particular
methods, use or applications, nor can we warrant that the materials will
be suitable for any intended use. This warranty is in lieu of all others
expressed or implied and may not be extended by representatives, written
sales or information or drawings. Nor do our distributors or salesmen or
any other representatives of distributors or of this company have
any authority to extend any guarantee beyond that outlined above or to
waive the limitations of the seller's liability.
Give us a call at (800)
323-0029, we'll tell you even more!
ALCO-NVC Inc.
580
St. Jean Detroit, MI 48214-0001
Toll Free: (800)
323-0029 Fax: (313)
331-4726
HOME | ABOUT US |
PRODUCTS | SYSTEMS |
MSDS | CONTACT | REQUEST
© ALCO NVC, INC. ALL RIGHTS RESERVED. WEB SITE BY: DIVERSIFIED
COMPUTER SERVICES, INC.
|