VIEW THE MSDS

360

SPEED-E-JOINT

DESCRIPTION
Speed-E-Joint is a preformed contraction joint and consists of two solid plastic pieces which have been pre-assembled for easy handling and installation.

USE
:  Easy handling and installation  :  Strong, inexpensive and eliminates waste in providing straight lines  :  Ideal solution to controlling cracks in concrete  :  Produces straight line cracks on surface of concrete slab and locks into the aggregate just below the surface 
  
ADVANTAGES
» Highly resilient with excellent recovery after compression  »  Protects against water infiltration when properly sealed  »  Easy to handle and install  »  Offers isolation capabilities   

APPLICATION
Press straight edge cutting tool into wet concrete to part the aggregate in a straight line. Place the Speed-E-Joint into the separation until the top segment lays flat on the surface of the wet concrete. Remove top. Concrete is then floated to fill all voids adjacent to the joint and finish in the normal manner. 

PACKAGING 
1" X 10'            500 LF/Carton 
1-1/2" x 10'      300 LF/Carton 
2" x 10'            200 LF/Carton 

FOR FURTHER SAFETY INFORMATION SEE MSDS REGARDING THIS PRODUCT

WARRANTY
We warrant our materials to be of good quality and will replace materials found defective, providing, however, that the buyer shall examine the materials when received and promptly notify us of any defects before the materials are used or incorporated into a structure for which they are intended. Unless otherwise agreed to in writing, this warranty shall extend only to comply with specifications of materials manufactured by and published by ALCO-NVC Inc., and made available to the buyer at request. We cannot warrant nor in any way guarantee particular methods, use or applications, nor can we warrant that the materials will be suitable for any intended use. This warranty is in lieu of all others expressed or implied and may not be extended by representatives, written sales or information or drawings. Nor do our distributors or salesmen or any other representatives of distributors or of this  company have any authority to extend any guarantee beyond that outlined above or to waive the limitations of the seller's liability.


Give us a call at (800) 323-0029, we'll tell you even more!

ALCO NVC
ALCO-NVC Inc.   580 St. Jean   Detroit, MI 48214-0001
Toll Free: (800) 323-0029   Fax: (313) 331-4726



HOME | ABOUT US | PRODUCTS | SYSTEMS | MSDS | CONTACT | REQUEST


© ALCO NVC, INC. ALL RIGHTS RESERVED. WEB SITE BY:
DIVERSIFIED COMPUTER SERVICES, INC.