MATERIAL SAFETY DATA SHEET
ALCO-NVC,
Inc Dated: February 27, 2003
PO BOX
14001 Reviewed: February 11,
2009
580 ST
JEAN 313-823-7500
DETROIT MI
48214 FAX:
313-331-4726
PRODUCT:
#602 Perlite Cant Strip and
Tapered Edge
SECTION 1 PRODUCT IDENTIFICATION
Chemical Name/Synonym: Insulation/Mixture
Chemical
Family: Mixture
NFPA
Hazard Rating: 1 Health 1 Fire 1 Reactivity
(0 =
Least; 4 Extreme)
OSHA
Hazardous: No
SECTION 2 COMPOSITION/INFORMATION
ON INGREDIENTS
Chemical Name: % (By WT) EXPOSURE
LIMITS
Perlite, Expanded 35 - 75 ACGIH: 10 mg/m3
CAS # 93763-70-3 TWA
(particulate matter containing
no asbestos and 1%
crystalline silica)
OSHA: 15 mg/m3
TWA (total dust): 5 mg/m3
TWA (respirable fraction)
Cellulose Fiber 20
50 ACGIH:
0.5 mg/m3
CAS #65996-61-4 TWA (inhalable
fraction, as benzene-
soluble
aerosol)(relates to asphalt)
Asphalt, Oxidized 20 50 (Bitumen
Fumes)
CAS # 64742-93-4 ACGIH: 10 mg/m3
OSHA:
15 mg/m3
Starch
1
11 TWA (total
dust): 5 mg/m3
CAS #9005-25-8
Polymeric Latex 0 10
CAS #: N/A
Sodium Silicate 0 1.0
CAS # 1344-09-8
SECTION 3 PHYSICAL/CHEMICAL DATA
Boiling
Point: N/A
Vapor Density: N/A
Specific
Gravity: 0.2
Evaporation
Rate: N/A
Vapor
Pressure: N/A
Soluble in
Water: Negligible
Appearance:
Brown to light brown with asphalt odor
SECTION 4 FIRE & EXPLOSION
DATA
Flash
Point: N/A
Upper
Explosive Limit: N/A
Lower
Explosive Limit: N/A
Special Fire
Fighting Procedures: None Known
Fire Fighting
Procedures: There is no potential for
fire or explosion
SECTION 5 REACTIVITY DATA
This
material is stable.
Hazardous
Decomposition/By-Products: None Identified
Hazardous
Polymerization: Will not occur
SECTION 6 HEALTH HAZARD DATA
Primary
Routes of Exposure: The primary hazards
from this product are due to dust particles released
during physical handling or cutting
of the material. Breathing dust from this product may cause a
scratchy throat, congestion, and
slight coughing. Getting dust on the skin, or in the eyes may cause
itching, rash or redness The asphalt
contained in the product has been solidified and will not present a
fume hazard.
Signs and
Symptoms of Exposure:
Eyes Temporary irritation (itching) or
redness may occur
Skin Temporary irritation (itching) or
redness may occur
Ingestion:
Product is not intended to be ingested or eaten under normal conditions
of use. If ingested,
it may cause temporary irritation
to the gastrointestinal (GI) tract, and should be treated
symptomatically.
Inhalation Irritation of the upper
respiratory tract (scratchy throat), coughing, and congestion may
occur in extreme.
Carcinogenicity: The Occupational Safety and Health
Administration (OSHA), National Toxicology
Program (NTP), International Agency
for Research on Cancer (IARC) and American Conference of
Governmental Industrial Hygienists
(ACGIH) have not classified this product in its entirety as a
carcinogen.
SECTION 7 FIRST AID PROCEDURE
Skin: Wash gently with soap and warm water to
remove dust and fibers. Wash hands before eating
or using the restroom.
Eyes: Do
not rub or scratch your eyes. Dust particles may cause the eye to be scratched.
Flush eyes with
large amounts of water for 5 15 minutes.
If irritation persists, contact a medical professional.
Inhalation: Remove to fresh air. Drink water to clear
throat, and blow nose to remove dust.
Ingestion: Product is not intended to be ingested or
eaten. If this product is ingested, irritation of the
gastrointestinal (GI) tract may
occur, and should be treated symptomatically. Rinse mouth with water
to remove material or dust and drink
plenty of water to help.
NOTE TO
PHYSICIANS OR FIRST AID PROVIDERS: This
product is a mechanical irritant, and is not
expected to produce any chronic
health effects from acute exposures. Treatment should be directed
toward removing the source of
irritation with symptomatic treatment as necessary.
SECTION 8 PREVENTATIVE
MEASURES/SAFE HANDLING & USE
Containment
Procedures: Pick up large pieces.
Vacuum dusts. If sweeping is necessary, use a dust
suppressant such as water. Do not dry
sweep dust accumulation. These procedures will help to
minimize potential exposures.
Waste
Disposal: Dispose in accordance with
Federal, state and local regulations.
Handling
& Storage: Use protective
equipment. Warehouse storage should be in accordance with
package directions, if any. Material
should be kept dry and protected from the elements.
KEEP OUT OF REACH OF
CHILDREN!
SECTION 9 CONTROL PROTECTION DATA
Ventilation: Normally not needed.
Gloves:
Leather or cotton gloves are recommended.
Eye
Protection: Safety glasses with
sideshields are recommended to keep dust out of the eyes.
Protective
Clothing or Equipment: Protective
equipment should be used as necessary to prevent
irritation of the throat, eyes and
skin.
Additional
Personal Protection Equipment: Requirements must be supplied by the user,
depending on use
conditions.
SECTION 10 REGULATORY INFORMATION
General
Product Information: No information on this product as a whole.
Component
Analysis: None of this products components are listed under SARA Section 302
(40 CFR 355
Appendix A), SARA Section 313 (40 CFR
372.65), or CERCLA (40 CFR 302.4).
SECTION 11 SHIPPING INFORMATION
Transport
Information: This product is not
classified as a hazardous material for transport.
SECTION 12 USER RESPONSIBILITY
This
product material safety data sheet provides health and safety information. The
product is to be used in applications consistent with our product literature.
Individuals handling this product must be informed of the recommended safety
precautions and must have access to this information. For any other uses,
exposures must be evaluated so that appropriate handling practices and training
programs can be established to ensure safe work place operations. Please
consult your local sales representative for any further information.
SECTION 13 CLEAN UP and DISPOSAL
Practice
good personal hygiene. launder contaminated clothing before reuse. Use control
protection such as safety glasses with sideshields, leather or cotton gloves,
barrier cream. Follow proper state and local regulations for disposal of this
product.
SECTION 14 DISCLAIMER
The
information set forth herein is believed to be accurate but is not warranted to
be, whether originating with ALCO-NVC, Inc or not. Recipients are advised to
confirm in advance of need that the information is current, applicable and
suitable to their circumstances.
This
Material Safety Data Sheet supersedes all other previously dated sheets for
this product.